Pro C7100

Roll-Away Cart Type 5010

• Holds up to 5,000 sheets for the SK5030 stacker, making it easy to transport output.

Notes:

This option can only be installed if High Capacity Stacker SK5030 is added.

Transit Pass Unit for Perfect Binder Type S1

• This option mates the engine to the Perfect Binder GB5010.

Notes:

This option can only be installed if Perfect Binder GB5010 is added.

Cover Interposer Tray for Perfect Binder Type S1

• Allows users to add covers to Perfect Bind books. Covers can be created on a different system and added to the completed book.

Notes:

This option can only be installed if Perfect Binder GB5010 is added.

Buffer Pass Unit Type S3

• Recommended for printing on coated stocks, or with high toner coverage to avoid bricking of paper.

Decurl Unit DU5040

• Recommended with medias prone to curl or in high humidity environments.

• W x D x H (inches): 2 x 19 x 7.5

• W x D x H (mm): 51 x 483 x 191

Plockmatic PBM500 Upgrade Kit

• For a field upgrade from a PBM350 to a PBM500.

Notes:

This option can only be installed if Plockmatic PBM350 is added.

Plockmatic PBM Trim Module

• Plockmatic PBM Trim Module for face trim of booklets only.

• W x D x H (inches): 14.2 x 24.4 x 35.4

• W x D x H (mm): 361 x 620 x 899

Notes:

1. This option can only be installed if either Plockmatic PBM350 or Plockmatic PBM500 is added.

2. Plockmatic PBM Book Fold Module is required to add this option.

Plockmatic PBM Book Fold Module

• The Book Fold module adds the finishing touch with a square folded edge and printable spine. Gives booklets the professional look of a perfect bound book.

• W x D x H (inches): 14.2 x 24.4 x 35.4

• W x D x H (mm): 361 x 620 x 899

Notes:

1. This option can only be installed if either Plockmatic PBM350 or Plockmatic PBM500 is added.

2. Plockmatic PBM Trim Module is required to add this option.

Die Set 32 Hole (Auto Wire and Pro Click)

• This die set accommodates 32 Hole Square for Auto Wire and Pro Click Bind.

Notes:

1. For use in the GBC StreamPunch Ultra only.

Punch Unit PU5020 NA

• Optional hole punching unit for Finisher SR5070 and Booklet Finisher SR5080.

Notes:

1. One of the following finishers is required to add this option: Finisher SR5070 or Booklet Finisher SR5080.

2. This option cannot be installed with Finisher SR4120 or Booklet Finisher SR4130.

PBM-m Cover Feeder

• Cover inserter used to feed covers into the Plockmatic finishing workflow.

• Weight: 22 lbs. (10 kg)

• W x D x H (inches): 12.2 x 20.9 x 7.5

• W x D x H (mm): 310 x 531 x 191

Notes:

Plockmatic 350-m required.

PBM Rotate Crease Trimmer

• The Plockmatic RCT Rotate Crease Trimmer provides professional looking, full bleed trimmed and creased booklets on the PBM350-m.

• The unit does not support offline work.

• The Plockmatic PBM Trim Module is needed to complete full bleed trim.

• Weight: 485 lbs. (220 kg)

• W x D x H (inches): 14.2 x 24.4 x 35.4

• W x D x H (mm): 361 x 620 x 899

Notes:

1. This option can only be installed if Plockmatic PBM350-m is added.

2. PBM-m RCT Cover Kit is required.

High Capacity Belt Stacker BST4000-1

• The High Capacity Belt Stacker is a practical option for more production-oriented sites. It allows long unattended runs and stacks up to 1,000 8.5" x 11"/A4 booklets of 4 pages.

• The stacker can be configured straight after the Plockmatic 350-m or in a 90-degree angle, which attaches after the standard output tray.

• The stacker requires its own power outlet.

• W x D x H (inches): 70.3 x 17.7 x 41.7

• W x D x H (mm): 1,786 x 450 x 1,059

Notes:

Plockmatic 350-m required.

Plockmatic Rail Unit

• Helps dock/undock the Plockmatic 350-m from the SR4110 Finisher.

• Cover inserter used to feed covers.

Notes:

Plockmatic 350-m required.

Die Set C4 Round 43-47H .2475 Color Coil

• This die set accommodates 43 Hole or 47 Hole Coil Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

GBC Die Set 3 Hole

• This die set accommodates a 3 Hole Ring Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

Die Set 3-5-7 Hole

• This die set accommodates a 3 Hole, 5 Hole and 7 Hole Ring Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

GBC Die Set VB LTR

• This die set accommodates a 11 Hole Velobind Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

GBC Die Set CombBind 19-20-21 Hole

• This die set accommodates a 19, 20, or 21 Hole Cerlox Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

GBC Die Set 21H-23H Wirebind

• This die set accommodates a 21 or 23 Hole Twin Loop Wire 2:1 Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

GBC Die Set W3 Square 32-34H Wirebind

• This die set accommodates a 32 or 34 Hole Twin Loop Wire 3:1 Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

Die Set C4 Coil Oval 43-47H

• This die set accommodates a 43 Hole or 47 Hole Bind.

Notes:

1. Only one can be installed inside the GBC StreamPunch Ultra MP at a time.

2. For use in the GBC StreamPunch Ultra MP only.

A3/11"x17" Tray Unit TK5010

• Converts the standard paper drawer 1 from 8.5" x 11" Tandem Tray to an 11" x 17"/A3 drawer. Reduces sheet capacity by half.

Friction Feed LCIT RT5090

• 4,000 sheet LCIT that can handle paper sizes up to 8.5" x 11"/A4 and up to 110 lb. Cover stock (300 gsm). Does not support clear or colored media.

• W x D x H (inches): 34 x 28.7 x 48

• W x D x H (mm): 864 x 729 x 1,219

Notes:

1. Only one type of LCIT can be installed on the engine. You can choose the Friction Feed or the Vacuum Feed.

2. This option cannot be installed with Vacuum Feed LCIT RT5100, Bridge Unit (BU5010), Multi Bypass Attachment Kit for RT5100 and Vacuum Feed Banner Sheet Tray.

Multi Bypass Oversize Sheet Tray Type S3

• Plastic extender for BY5010 to accommodate oversize prints.

• W x D x H (inches): 43 x 22 x 8.27

• W x D x H (mm): 1,092 x 559 x 210

Notes:

This option can only be installed if Multi Bypass Tray BY5010 is added.

Bridge Unit BU5010

• Bridge unit used to connect up to 3 Vacuum Feed LCITs RT5100. One unit goes between each RT5100.

• W x D x H (inches): 13 x 28.7 x 39.3

• W x D x H (mm): 330 x 729 x 998

Notes:

1. If two Vacuum Feed LCIT RT5100 are added, then this option will need to be added.

2. If three Vacuum Feed LCIT RT5100 are added, then two of this option must be added.

Multi Bypass Attachment Kit for Vacuum Feed LCIT Type S3

• Needed to configure the Multi Bypass Tray BY5010 with the Vacuum Feed LCIT RT5100.

Tab Sheet Holder Type 3260

• Allows users to set up and print on tabs to separate chapters within the document, eliminating the manual collation of document sets.

• Can be used in either Tray 2 or Tray 3 from the standard paper trays, but not both.

EFI Server HDD Security Type E-83A

• Removable HD for Fiery E-83.

Notes:

This option can only be installed if Color Controller E-83 is added.

FACI Furniture - E-41/E42

• Stand, keyboard, monitor, and mouse for Fiery E-44B.

Notes:

This option can only be installed if Color Controller E-44B is added.

FACI Furniture Bundle Type E-83A

• Stand, keyboard, monitor and mouse for Fiery E-83.

Notes:

This option can only be added if Color Controller E-83 is added.

Color Profile Suite Support and Maintenance Contract

• Additional 1 year support for Color Profiler V4 software.

Color Controller E-43A

• Fiery E-43A FS150 Pro 80 controller for Pro C7100 Series.

• Minimizes repetitive tasks and touch points with workflow automation tools.

• Delivers consistent output quality and precise color matches with Fiery ColorWise® technology and Fiery Spot-Onâ.

• Makes elements pop out with the optional specialty color in White or Clear Toner.

• Prints intricate text details and ultra-thin lines with the standard Dynamic HD Text and Graphics feature.

• Easily perform elaborate document preparation with optional advanced make-ready tools and much more.

Notes:

This item cannot be installed with the Color Controller E-83A, EFI Graphic Server HDD Security Type E-83A or FACI Furniture Bundle Type E-83A.

Color Controller E-83A

• Fiery E-83A FS150 QX controller for Pro C7100 Series.

• Processes large and complex files up to 55% faster with Fiery HyperRIP to maximize your return on investment.

• Ensures consistent and accurate color with the advanced color management tools.

• Prints crisp hair-thin lines and fine details in text with the standard Dynamic HD Text and Graphics feature.

• Increases impact with personalization and complex setup using the leading Fiery VDP technology and powerful make-ready capabilities and much more.

Notes:

This item cannot be installed with the Color Controller E-43A, EFI Graphic Arts Package Premium Edition, EFI DIMM 4GB, EFI Server HDD Security Type E-43A or FACI Furniture Bundle Type E-43A.

EFI Graphic Arts Package Premium Edition

• Software upgrade for Fiery E-43 only.

Notes:

This option can only be installed if Color Controller E-43 is added.

EFI DIMM 4GB

• Ram upgrade for Fiery E-43.

Notes:

This option can only be installed if Color Controller E-43 is added.

HDD Security

• Removable Hard Disk for Fiery E-44B.

Notes:

This option can only be installed if Color Controller E-44B is added.

TF Color Standard Type FS150

• Software upgrade bundle for Fiery E-43 includes ES-2000 Spectrophotometer and Impose FS150.

Notes:

This option can only be installed if Color Controller E-43 is added.

TF Color Advanced Type FS150

• Software upgrade bundle for Fiery E-83 includes GAPE, CPS4.X, ES-2000 Spectrophotometer, Impose FS150, Compose FS150.

Notes:

This option can only be installed if Color Controller E-83 is added.

Fiery CPS v4

• Contains Color Profiler v4 software and ES-2000 spectrophotometer: Includes 1 year of phone support.

Notes:

Color Controller E-23C is required to add this option.

Fiery ES-2000 Spectrophotometer

• Color measurement device for calibration and profiling. Enables fast, precise, and flexible color management that produces the highest color quality.

Notes:

Color Controller E-23C is required to add this option.

Fiery CPS V4.0 Software only

• For customers that have an ES-2000 Spectrophotometer and want Color Profiler V4 software: Includes 1 year of phone support.

EFI Impose Type FS150

• Helps to automate and streamline labor-intensive prepress tasks.

Notes:

Color Controller E-23C is required to add this option.

EFI Compose Type FS150

• Provides intuitive tools that make advanced document preparation simple and quick.

Notes:

Color Controller E-23C is required to add this option.

TCRU A Type C7100

• TCRU A contains customer replaceable parts for IQ and reliability and is mandatory for all mainframes.

• Includes: Drum Cleaning Unit, Charger Roller Unit, Belt Cleaning Unit, Pre-Transfer Belt Unit, Paper Feed Rollers, Fusing Cleaning Unit and Smoothing Rollers.

TCRU B Type C7100

• TCRU B contains an entire fusing unit and is mandatory for all mainframes.

• Includes: Fuser Unit.

TCRU C Type C7100

• TCRU C contains components to maintain the 5th color and is mandatory on a 5 color unit.

• Includes: OPC, Drum Cleaning Unit and Charger Roller Unit.

Removable Hard Drive Kit for Pro C7100 (RHD)

• Allows users to remove the device's hard drive and lock it away in a vault or safe.

Optional Counter I/F Type A

• Optional 20-Pin Interface used to attach external key counter or key card device.

Set of Two Swap-able Drives with Docking Trays (ARHD)

• An additional removable hard drive to allow the complete separation of classified, top secret, and/or sensitive information from those that do not or should not have access. The ARHD also allows the device to be serviced without using the hard drive that contains the information that needs to be kept secret.

Notes:

Removable Hard Drive Kit for Pro C5200 (RHD) is required to add this option.